< Residential Geo-Thermal Permit Application

Property Information


The online application is for Licensed Contractors only

Applicant Information

Project Information


will save, indemnify, and keep harmless the County of Mills, its officers, employees, and agents against all liabilities, judgments cost, and expenses which may accrue against them in consequence of the granting of this permit, inspections, or use of any on-site or off-site improvements placed by virtue hereof, and will in all things strictly comply with all applicable rules, ordinances, and laws. Signature constitutes an attestation by the applicant that application complies with all covenants, conditions, and restrictions.


Required Inspections: It shall be the duty of the holder of this building permit or their duly authorized agent to notify the Building & Safety Department when work is ready for the following required inspections:

Underground/Rough-In Inspection: All underground piping from wells to house is required to be inspected BEFORE covering or backfilling. The plumbing code requires that this inspection shall have a minimum of a 15 psi test holding for minimum 20-minutes on all pipes from wells to house or a code equivalent flow test provided. All new system related or replacement equipment must be accessible for inspections.

Final Inspection: All related equipment and/or system must be up and running and working properly for final inspection verification.

Inspections should be scheduled and recorded before 5:00 p.m. the day BEFORE the inspection is requested.

After Hours, Weekend and Holiday Inspections should be scheduled and the appropriate fee must be paid at least two-days before the required inspection date.

All inspections should be called in at (712) 527-4347

AM scheduled inspections will be performed from 8:00 a.m. to 12:00 noon.

PM scheduled inspections will be performed from 12:00 noon to 4:00 p.m.

Any special requested inspection times will need to be pre-approved by your scheduled Inspector, the day before.

Upload Files: